For Van Train Car Boat Semi Truck Air Horn with Electric Air Valve 4 Trumpet 12V

For-Van-Train-Car-Boat-Semi-Truck-Air-Horn-with-Electric-Air-Valve-4-Trumpet-12V-01-vo
For Van Train Car Boat Semi Truck Air Horn with Electric Air Valve 4 Trumpet 12V
For Van Train Car Boat Semi Truck Air Horn with Electric Air Valve 4 Trumpet 12V
For Van Train Car Boat Semi Truck Air Horn with Electric Air Valve 4 Trumpet 12V
For Van Train Car Boat Semi Truck Air Horn with Electric Air Valve 4 Trumpet 12V
For Van Train Car Boat Semi Truck Air Horn with Electric Air Valve 4 Trumpet 12V
For Van Train Car Boat Semi Truck Air Horn with Electric Air Valve 4 Trumpet 12V

For Van Train Car Boat Semi Truck Air Horn with Electric Air Valve 4 Trumpet 12V
Identify a suitable area for mounting, preferably an unobstructed sheet-metal surface like the frame or body of the vehicle so as to provide a firm platform which will help protect the horn from damage due to excessive shaking. Do not attach the horn to any plastic or other flexible material. Using the back bracket as a guide estimate and mark the positions for the holes, then perforate to size using a drill. Move the support bracket towards the trumpet’s opening until is tight, then mark the hole and drill. Use the provided mounting hardware to fasten the horn. For Van Train Car Boat Semi Truck Air Horn with Electric Air Valve 4 Trumpet 12V. On one side of the included 3/8 OD air line, attach the compression nut and force the air line upon the male inlet fitting which is found on the electric solenoid valve. Pass the brass nut through the inlet fitting and fasten. Take the air line’s other side and place the compression nut of the air tank fitting on it. Force the air line onto the male fitting of the tank and then fasten the compression nut. WARNING: Avoid tying the brass nut too tight. Wire one of the solenoid valve’s leads to the positive (+) terminal of the battery or alternator. WARNING: We highly recommend that you use a 10A fuse (not provided) to assure that the circuit remains safe and will not be damaged by excess current. Wire the other lead of the solenoid valve to one of the terminals on the horn button. Ground the other terminal on the horn button by wiring it to bare metal. This powerful quad trumpet air horn produces a loud roaring sound. Chrome look, made entirely of metal for maximum protection against all weather conditions. Horn comes with a 12/24V solenoid, hose and mounting hardware. An on-board air system is required for operation. Ideal for all vehicles with a 12/24V system. This horn is sure to draw all the attention you are looking for. Avoid dismantling this horn’s electrical elements. Avoid touching compressor components with your bare hands immediately after or during use. Avoid setting up any parts of the horn where there is a risk of falling off or risk of coming in contact with water. Set the horn up for use only in areas with adequate ventilation. Avoid sounding the air horn when in close range to your ear(s) or the ear(s) of others. Make sure your battery ground is detached before getting your installation started. Employ equipment for eye protection during drill operations. Ensure that your air system has no pressure before starting the installation. The specific voltage requirement for this horn is 12/24 volt DC, therefore installation must be done to a DC power source of 12/24 volts. The Horn is the perfect addition to 12V or 24V vehicles. Onboard Air System Required. Type: For Van Train Car Boat Semi Truck Air Horn with Electric Air Valve 4 Trumpet 12V. Trumpet Size:16-¼ L x 14′ W x 11′ H. Package Size18.5″x14.76″x13.98470x375x355mm. Gross Weight:11.4 lb (5.18kg). Operation Air:29-116 PSI(0.2Mpa-0.8Mpa). Material:Metal Base Construction. Quad Trumpet Air Horn. 12V/24V Electric Air Valve (Solenoid). ¼ OD Nylon Plastic Hose (6 Feet). Kit or Single Part. SUV Boat Motorcycle Truck Car Boat Horn. 2x For 1999 2000 2001 2002 2003 2004 2005 2006 2007 Ford F150 Remote Car Key Fob. Wheel Bearings For Chevy Impala Pontiac Grand Prix Buick Regal Bearing 2 Front. For 88-98 Chevy GMC 1500/2500/3500 Towing Mirrors Manual Side Mirrors Truck Pair. Front Wheel Hub Bearing For Chevy Impala Pontiac Grand Prix Buick 513121 5 Lug. Sepcial LED Package Kit. Cylinder Piston Gasket Kit. Cab Marker Roof Running Light. Door Upper Latch Lock Rear Left Driver For 97-04 Ford F-150 F250 6L3Z-18264A27-A. ECCPP Upper Lower Ball Joint For 83-97 Nissan Pathfinder 720 D21 4WD K9022 K9347. The item “For Van Train Car Boat Semi Truck Air Horn with Electric Air Valve 4 Trumpet 12V” is in sale since Tuesday, April 6, 2021. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Steering Wheels & Horns”. The seller is “eccppautoparts” and is located in Ontario, California. This item can be shipped to United States.
  • UPC: Does not apply
  • Brand: ECCPP
  • Manufacturer Part Number: ECC16729701PP
  • Type: Electric Air Horn
  • Horn Type: High Pressure Air
  • Features: Quick Release
  • Placement on Vehicle: Left
  • Fitment Type: Direct Replacement
  • Mounting Hardware Included: Yes
  • Quantity: 1
  • Custom Bundle: No
  • Modified Item: No
  • Kit or Single Part: Kit
  • Interchange Part Number: Air Horn
  • Other Part Number: SUV Boat Motorcycle Truck Car Boat Horn
  • Superseded Part Number: 4 Trumpet
  • Horn Volt: DC 12/24V
  • Color: Silver
  • Surface Finish: Chrome
  • Material: Chrome
  • Weight: 11.4 lb
  • Length: 16-¼
  • DB Output: 180 DB
  • Current: 4.0A

For Van Train Car Boat Semi Truck Air Horn with Electric Air Valve 4 Trumpet 12V

admin

View more posts from this author