Eagle Creek Knife Set – HC-21SP. THE KNIFE, WHETSTONE, FIRE STARTER KIT, DUAL CARRY LEATHER SHEATH. AND COLLECTIBLE HARD BOX ARE WHAT YOU GET. HIGH QUALITY 11 5/8″ OVERALL – 6 3/4″ HOLLOW GRIND BLADE. D2 Tool Steel is a high-carbon, high-chromium, air-hardening tool steel that is characterized by a relatively high attainable hardness and numerous, large, chromium-rich alloy carbides in the steel. D2 provides an effective combination of wear resistance and toughness. D2 holds an edge very well. When needed, use a Diamond Wet Stone or better to re-sharpen the blade at 20-degrees. When done using the knife, wash it is soap and water, dry completely, coat in gun oil and store away from the sheath. Leather pulls moisture out of the air and can rust the blade if stored improperly. Vacuum Hardened to 58-60HRC – SHARP! 6 1/8 Cutting Edges. 1 5/8 Wide Blade. 4 7/8 Long Rounded Comfort Grip Handle. 3/16 Thick at the Spine. The knife comes with the high-quality cowhide leather sheath in the photos. If the sheath has a loop it is for a fire starter rod (included). If the sheath has attached straps they are for concealed and horizontal carry options. KNIFE CARE AND CLEANING: When needed, use a Diamond Wet Stone or better to re-sharpen the blade. When done using the knife, wash it in soap and water, dry completely, coat in olive oil and store away from the sheath. All our knives and axes are 100% handmade. We do not use any CNC machining, water-jet, or pre-cut blanks to make our items. Each knife or Axe will be 100% unique and may have some handmade characteristics that make them unique. Larger items will post by weight and flat rate boxes. We also might use UPS ground where possible with axes and other larger and heavier combined orders. To get our combined discount you need to wait for us to combine the orders. Continue Reading
CUSTOM HANDMADE D2 STEEL HUNTING BOWIE KNIFE WITH BUFFALO HORN HANDLE & LEATHER SHEATH. This beautiful knife is 100% hand made using high quality material. Blade of this knife is reputed to be tough, resistant to shattering and have a sharp and resilient edge. Distinctive pattern on the blade is forged by hammer and is made of D2 steel. This knife is made of quality material and is lab tested under intense condition. The handle material, blade steel and leather sheath are made professionally with extra care. Keep the knife dry and clean after each usage. Our Tools are sharp so open and use them carefully. Store away from children. We are not responsible for any injury associated with the use of our tool. Continue Reading
SILVER STAG is known for their beautiful craftmanship in their hunting knives, and with the STAG HORN HANDLES. The original container box and papers are with the knife. This Knife is a larger HUNTING KNIFE with a 6 inch STEEL BLADE and a CROME FINISH. BUTT end to the BLADES tip is 11 1/4 inches. The blade is 6 inches in length. A well balanced knife with a very confortable feel as the hand holds the horn handle, This knife was made to use or just to collect. Many collectors add this one to keep as a addition to their collection or to give as a gift. The LEATHER SHEATH is custom made, just for SILVER STAG KNIVES. Continue Reading
Overall Length: 15.00″ Handle Length: 5.00 ” Blade Length: 10.00 Blade Material: 440-c STEEL Handle Material: STAG HORN. YOU WILL NOT FIND A BETTER QUALITY HANDMADE KNIFE, ANYWHERE, FOR THE PRICE. This knife is complete with a top quality extra thick leather sheath. The leather sheath is totally hand tooled and sewn. Extra thick leather and strong stitching make this sheath robust which can withstand years of rough and tough use. The sheath can be worn on belt. Please do not hesitate to ask for further information, see the full description for detailed portfolio. Or you can do this by yourself with the help of high grain stone with hands. Uniqueness, Designed sharply, gloriously and elegantly. Designed with sharp blade. Incredible hand grip with excellent balanced. We also make blades in high-carbon, alloy steel, D2 tool steel, J2 and ATS 34 Stainless steel. Please let us know if you are interested in custom knife order. You decide on the type of knife and features and accessories you want. Also let us know your imagination knife. We will transform your imagination into real knife. We only hire track able courier service. We sell to buyers worldwide. Except Israel, Brazil and Russia. Remote Areas charges will be paid by Buyers. We are confident that you will like our products as we have struggle hard to provide you top quality products. We treat any problem with goods or service very seriously and you will receive immediate attention. We will not be responsible for any injury, death or criminal acts due to the misuse of our products. If custom in your county hold the item than we are not responsible for the loss of your item. Never store your knife for long time in leather sheath. Leather can absorb water, which will rust the knife. Always clean the blade after using with oil or wax. If the item stuck at custom you will. THANK YOU VERY MUCH FOR TAKING INTEREST IN OUR LORD OF METAL’S PRODUCTS. Continue Reading
Super nice mint Vintage Puma Skinner Knife with Stag handles with original box. The control tag date stamp is 26291. The Puma model number is 11 6393. The knife is over 30 years old. The blade is German stainless steel and the handles are stag with three brass rivets and a lanyard hole that is brass lined. This knife measures 9 1/2″ overall with a 5 1/8″ blade. The front of this knife blade is etched: 11 6393 HANDMADE – PUMA SKINNER – GERMANY STAINLESS. Blade length: 129 mm. Blade thickness: 3,5 mm. Knife weight: 160 g. Steel / hardness: 1.4116 / 55-57 HRC. You are also responsible for understand the Custom Laws in your country and by purchasing this item you are in compliance with all of your laws. We will not sell to minors. Continue Reading
Antique Bovine Horn Lurcher/Whippet Hunting Dog Walking Stick/Cane-Silver Collar. This walking stick features a bovine horn handle that has been carved into the shape of a lurcher/whippet, the dog features inset, sharp glass eyes. The cane features an untested silver collar. The collar is blank, ready to be embossed with whatever you choose if you wish to do so. A beautifully created item, bursting with character. Measures: Full length of the stick – 86.6cm Handle outwards -10.5cm The diameter of the shaft – 16mm Weight- 200g. Get images that make Supersized seem small. Showcase your items with Auctiva’s. Track Page Views With.
Continue Reading
Blade material : Carbon Steel. Handle material : Stag Horn. Blade Width : 2.00. Carbon steel with temper hardness 56 – 60 HRC. These MEASUREMENTS ARE APROXIMATELY. All Items Are Make To Order.. Hand Stitched Leather Sheath. Introducing a stunning 18-inch handmade hunting knife with a beautiful stag horn handle. Crafted with high-quality carbon steel and a full tang, this knife is perfect for any ambidextrous hunter. The clip point blade, over 5 inches in length, boasts a sharp and plain edge in a sleek silver color. This custom and handmade knife includes a sheath for easy and safe storage. The handle material is Micarta, giving the knife an extra touch of elegance. Whether you’re a collector or a hunter, this reproduction knife is a must-have for your collection. Don’t miss out on the chance to own this one-of-a-kind piece. Continue Reading
CUSTOM HANDMADE D2 STEEL HUNTING BOWIE KNIFE WITH STAG HORN HANDLE & LEATHER SHEATH This beautiful knife is 100% hand made using high quality material. Blade of this knife is reputed to be tough, resistant to shattering and have a sharp and resilient edge. Distinctive pattern on the blade is forged by hammer and is made of D2 steel. This knife is made of quality material and is lab tested under intense condition. The handle material, blade steel and leather sheath are made professionally with extra care. MEASUREMENTS Overall Length: 17″ Blade Length: 12″ Handle Length: 5 Handle Material: Stag Horn Sheath: Pure Leather Rockwell Hardness: 58-60 Care Instruction Keep the knife dry and clean after each usage. PRECAUTIONS: Our Tools are sharp so open and use them carefully. Store away from children. We are not responsible for any injury associated with the use of our tool. Our products are age restricted and we do not sell to anyone below 18 years of age. Please be sure that we don’t accept return of used or broken products, be sure to keep the produt safe if you want to return it. We are working in this field since 2018. We worked and learned with the passage of time. We have a team of professional knife makers who have experience of more then 10 years. All of us here at AHA BLADES work hard day and night to provide you the quality you paid for. Your feedback is really important for us. Continue Reading
Blade material : Carbon Steel. Handle material : Stag Horn. Blade Width : 2.00. Carbon steel with temper hardness 56 – 60 HRC. These MEASUREMENTS ARE APROXIMATELY. All Items Are Make To Order.. Hand Stitched Leather Sheath. Introducing a stunning 18-inch handmade hunting knife with a beautiful stag horn handle. Crafted with high-quality carbon steel and a full tang, this knife is perfect for any ambidextrous hunter. The clip point blade, over 5 inches in length, boasts a sharp and plain edge in a sleek silver color. This custom and handmade knife includes a sheath for easy and safe storage. The handle material is Micarta, giving the knife an extra touch of elegance. Whether you’re a collector or a hunter, this reproduction knife is a must-have for your collection. Don’t miss out on the chance to own this one-of-a-kind piece. Continue Reading
Blade material : Carbon Steel. Handle material : Stag Horn. Blade Width : 2.00. Carbon steel with temper hardness 56 – 60 HRC. These MEASUREMENTS ARE APROXIMATELY. All Items Are Make To Order.. Hand Stitched Leather Sheath. Introducing a stunning 18-inch handmade hunting knife with a beautiful stag horn handle. Crafted with high-quality carbon steel and a full tang, this knife is perfect for any ambidextrous hunter. The clip point blade, over 5 inches in length, boasts a sharp and plain edge in a sleek silver color. This custom and handmade knife includes a sheath for easy and safe storage. The handle material is Micarta, giving the knife an extra touch of elegance. Whether you’re a collector or a hunter, this reproduction knife is a must-have for your collection. Don’t miss out on the chance to own this one-of-a-kind piece. Continue Reading
