Tag: train

HornBlasters Outlaw Chrome 127H Loud Train Horn Kit for Trucks with Air System

HornBlasters-Outlaw-Chrome-127H-Loud-Train-Horn-Kit-for-Trucks-with-Air-System-01-wdud
HornBlasters Outlaw Chrome 127H Loud Train Horn Kit for Trucks with Air System
HornBlasters Outlaw Chrome 127H Loud Train Horn Kit for Trucks with Air System
HornBlasters Outlaw Chrome 127H Loud Train Horn Kit for Trucks with Air System
HornBlasters Outlaw Chrome 127H Loud Train Horn Kit for Trucks with Air System

HornBlasters Outlaw Chrome 127H Loud Train Horn Kit for Trucks with Air System
HornBlasters Outlaw Chrome 127H Train Horn Kit. We strive to offer the best prices possible for our products. We know our products. Hear This Horn Now! Want to make a statement on the road? Our Outlaw Chrome 127H Train Horn Kit is the perfect solution for those who want a flashy, attention-grabbing train horn without breaking the bank. The horn features three large metal bells that create a powerful, tri-tone sound that is one of our loudest train horns for its size. With its sleek and modern chrome finish, this horn is guaranteed to turn heads. The compact 127H Air Source Unit that comes with this kit is both affordable and efficient, making it the perfect choice for those on a budget or with limited installation space. The 1.5-gallon tank provides enough air to give your Outlaw Chrome Train Horns a solid 3-4 seconds of continuous honk time. And the 275C air compressor pre-mounted to the tank can recharge the tank from 90-120 PSI in only 35 seconds! Capable of filling tires or using small air tools. Complete Air Horn Kit w/ Detailed Instructions. This horn produces 140.4 Decibels. 1.5-Gallon Air Tank = 3-4 Seconds of Honk Time. 120 PSI Operating Pressure. Horn Length: 18.5 (469.9 mm). Horn Width: 15.5 (393.7 mm). Horn Height: 12.5 (317.5 mm). Air Source Length: 15.2 (386.08 mm). Air Source Width: 5.9 (149.86 mm). Air Source Height: 12.8 (325.12 mm). Includes: Outlaw Chrome; HornBlasters 127H Air Source; Air Source Wiring Kit; All airline/fittings necessary for install. No matter whether you’re doing a custom build or just looking at add a little volume to your ride, we’ve got you covered. Our knowledgeable staff is always ready to help you with your build. Whether you are working with a compact car or a diesel, our staff has experience getting our horns on nearly anything. Our company was founded to design, produce, and sell the best train horn kits possible. This is exactly what we do. Our company started in Tampa Bay, Florida and has been providing quality train horn kits with premium class customer service since 2003. We also strive to offer a variety of other unique items such as PA Systems, electric horns, and air suspension systems. These individuals focus on exceeding expectations of customers who want the exact component at the best price in the quickest time. Our goal is to provide a WOW experience during every customer interaction. Whatever you need, whether it’s a replacement part or an upgrade to your system, we can help you get the correct parts. We know our products and have real life experience with them. We love our horns and use them on our own vehicles too! We fulfill our mission daily with enthusiasm and optimism, learning from our ongoing opportunities and successes. We enjoy a modern yet tricked out work atmosphere while ensuring a true learning environment to develop our people. Upon opening a return request a return label will be provided for the item. After 30 days, we may not be able to accept a return on an item. We ask that you take care in packing the item so we receive it in the condition it was sent in. Failure to properly pack the item will result in damage while in transit back to us. It is extremely important these items are packed carefully when starting a return. HornBlasters is not responsible for any damages or losses incurred due to use of our products. It is your responsibility to use our products safely. Hearing protection is required. Long exposure to these horns will permanently damage your hearing. Hearing loss is no joke. We will attempt to contact you immediately regarding your order should your address be flagged as invalid. This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
HornBlasters Outlaw Chrome 127H Loud Train Horn Kit for Trucks with Air System
Continue Reading

Air Compressor For Train Horns Air Pressure Supply Kit Silver With 1/4 NPT 12V

Air-Compressor-For-Train-Horns-Air-Pressure-Supply-Kit-Silver-With-1-4-NPT-12V-01-uey
Air Compressor For Train Horns Air Pressure Supply Kit Silver With 1/4 NPT 12V
Air Compressor For Train Horns Air Pressure Supply Kit Silver With 1/4 NPT 12V
Air Compressor For Train Horns Air Pressure Supply Kit Silver With 1/4 NPT 12V
Air Compressor For Train Horns Air Pressure Supply Kit Silver With 1/4 NPT 12V
Air Compressor For Train Horns Air Pressure Supply Kit Silver With 1/4 NPT 12V

Air Compressor For Train Horns Air Pressure Supply Kit Silver With 1/4 NPT 12V
The silver maintenance free heavy-duty air compressor is rated at 200psi and is designed for any high-pressure on-board air system or other applications requiring air pressure supply. The perfect kit helps to save the power of the air compressor. The unit is equipped with standard 1 / 4 NPT stainless steel braided lead hose and mounting hardware. Applicable to all vehicles equipped with 12V system. Included in this kit. 1 200PSI air compressor with 1/4 NPT stainless steel braided leader hose. Air Compressor For Train Horns Air Pressure Supply Kit Silver With 1/4 NPT 12V. 1 200PSI air compressor with. 1/4 NPT stainless steel braided leader hose. Type: 200PSI black air compressor. Thread: 1/4 NPT stainless steel braided leader hose. Working Voltage:12 Volt. Package Size(inch):14.29.87.4. 11″(L)×3.9″(W)×6.5(H). Max Amp Draw:23 Amps. Max Working Pressure:200 PSI. Do not attempt to disassemble, repair or customize this product. Avoid setting up any parts of this product where there is a risk of falling off or risk of coming in contact with water. Never leave this product unattended during use. Intended for use by adults only. During and immediately after use, avoid touching any part of the compressor with bare hands as it is very hot during such periods. Avoid sounding the air horn when in close range to your ear(s) or the ear(s) of others. Avoid use of product near flames, explosive materials, aerosol products or oxygen devices. Be sure to pump nothing other than atmospheric air. It is important to determine the maximum air pressure for any tool or attachment before using it. Air sprayer or nozzle should always be pointed away from any part of the body. The compressor has Thermal Overload Protection, if this protection activates, cut off the source of power and let the unit cool down for about 30 minutes. This will reset the system and allow you to safely resume use of the air compressor. Make sure your battery ground is detached before you begin. Set the horn up for use only in areas with adequate ventilation. Employ equipment for eye protection during drilling operations. Ensure that your air system has no pressure before you begin. The specific voltage requirement for this horn system is 12 volt DC, therefore installation must be done to a DC power source of 12 volts. Determine a dry place to mount your compressor. If you have chosen to install in the engine compartment, you should mount it as close to the front as possible to allow for maximum flow of air around compressor and also to avoid heat from the exhaust. IMPORTANT: Never attach the compressor to any plastic or other flexible material. For optimal results, the compressor should be placed as close to the battery as possible. This will reduce the amount of wiring needed. Avoid placing compressor near flammable liquids. If you are planning to move compressor’s air intake to an area other than where the compressor was installed, make sure your placement allows for the airline to be routed from the air inlet of the compressor to the remote inlet air filter. Mark the spots for the holes with the mounting base as a guide and then drill. Make sure the compressor is secured. To enhance performance and make sure the battery of your vehicle doesn’t discharge, keep the engine running while the compressor is being used. Connect the stainless steel braided hose of the compressor to the tank’s inlet port. IMPORTANT: The tank’s inlet port must be 1/4 N. The check valve is an important part of the air compressor and has only one function: to let air flow from one side to the other, in this case from the compressor to the tank, while blocking air flow in the opposite direction. IMPORTANT: When installing the braided hose do not rotate or remove the inline check valve located at the end of the hose on the side that connects to the air tank. Doing so will damage its seals and will result in damage to your air compressor. Using a compatible remote air filter installation kit (NOT PROVIED) your compressor’s air intake can be installed in an area other than where the compressor was installed. The red wire of the compressor should be connected to (+) 12-volt power source. IMPORTANT: To prevent the compressor from over running and possible damage due to an air leak, connect the compressor’s red wire to a power source in the vehicle that only gets power when the vehicle’s ignition is on. Recommended connection points are: windshield wiper motor, blower motor or an accessory terminal on the fuse panel. Make sure to use wire that is as heavy as the wire of the compressor and to use the included fuse for circuit’s protection. Attach the black wire to any of the Pressure Switch’s connections located on the air tank. The remaining Pressure Switch connection should be attached to ground. Secure the end to any metal body or to the negative side of the vehicle’s battery. The ground connection should be rust and paint free. Your compressor is now set for use and will turn on automatically when air pressure in the air tank falls. When air pressure reaches maximum PSI, it will turn off. If the compressor fails to reach the maximum air pressure of the tank, which is the Pressure Switch’s cut OFF pressure, check all air connections for leaks. While the compressor is pumping, use soapy water or any bubble solution to perform this check. In case the leak remains after tightening, re-apply thread sealant. Make sure that electrical and fitting connections are regularly inspected, cleaned and tightened when needed. Make sure mounting screws are regularly tightened if needed. Compressor features a washable air filter which should be cleaned using any mild form of liquid soap every two months if it gets dusty. Just remove the front cover of the filter’s housing to reach it. Replacement time frames depend on the operating environment and how often it is used. Clean dirt and dust from heat spreader and motor housing of the compressor. The motor of the air compressor has a maintenance-free lasting lubricant. SOLUTIONS TO COMMON ISSUES. Solution 1: Check all switches to make sure they are ON. Solution 2: Check the fuse; if blown, disconnect compressor from power and replace the fuse. Solution 3: Allow compressor to cool off for 30-60 minutes. Solution 4: Check pressure switch, replace if damaged or inoperable. Issue: Excessive moisture in horn or safety valve. Solution 1: Depressurize and drain the tank. Solution 2: Relocate the on-board air system to a drier location. Issue: Continual cutting-off of Thermal overload protection. Solution 1: Relocate the on-board air system to a drier, cooler location. Solution 2: Replace the compressor. Issue: Excessive vibration or noise. Solution 1: Tighten system components. Issue: Loss of pressure of tank when compressor is shut off. Solution 1: Tighten drain cock. Solution 2: Examine air and check valves and replace if damaged or leaking. Solution 3: Use soap and water solution on air connections, and tighten connections or repair leaks where needed. Olution 4: Replace safety valve if present in the tank, it may be defective. Issue: Compressor runs continuously and has low air flow. Solution 1: Decrease the frequency of use. Solution 2: Use soap and water solution on air connections, and tighten connections or repair leaks where needed. Solution 3: Clean or replace the air filter element if it is clogged. Solution 4: Replace compressor. Make sure you never attempt to disassemble this horn kit’s electrical components. Never use your bare hands to any part of the compressor immediately after or during use. Avoid operating this product in an area with risk of falling or submergence into a liquid (water). Do not reach out for or touch any component that has fallen or been submerged into water. Make sure you set up in areas with good ventilation. Never sound the air horn anywhere near your ear(s) or that of another person. Make sure your battery ground is detached before getting your installation started. The specific voltage requirement for this horn kit is 12 volt DC, therefore installation must be done to a DC power source of 12 volts. 14.29.87.4. The images shown are not the actual item and are for your reference only. Service transit time is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season. There are NO EXCEPTIONS! FEEDBACK IS VERY IMPORTANT TO US. It is impossible to address issues if we do not know about them! Transfer Case Shift Motor. Secondary Air Injection Pump. Center Console Organizer Parts. ATV Brake Master Cylinder. Mass Air Flow Sensor. Splash Guards & Mud Flaps. Brake Disc Rotors and Pads. Brake Pads & Rotor & Caliper. Brake Pads & Calipers. Light Bar Mount Bracket. Cylinder Head Gasket Sets. 4 Pcs wheel hub bearing. UTV & ATV Brake System Parts. Kevlar Carbon Brake Pads. Pivot Brake Clutch Lever. Cooling Fans and Fan Clutches. Brake Rotors Pads & Drum Shoe. Rear Window Louver Cover. Engine Splash Shield Guard. C Notch & Flip Kit. Other Golf Cart Parts. Body Side Door Moulding. Motorcycle Carburetor & Parts. Cylinder piston gasket kit. Wheel Hub Bearing Knuckle. Air suspension valve solenoid. Ignition Coil & Spark Plug Set. Shift Knob Lever Head. Wheel Hub Centric Rings. Fit for 2012 2013 2014 Mazda 5 Front 2 Pcs Strut & Coil Spring Assembly Kits. Front (2) Strut & Coil Spring Assembly Fits 2008 2009 2010 Toyota Highlander. 6x Ignition Coils for Nissan Frontier Pathfinder Altima Maxima 3.5L 4.0L UF349. For Ford Ranger 2.3L 2.5L F150 Expedition Lincoln Mercury FD487 Ignition Coil.
Air Compressor For Train Horns Air Pressure Supply Kit Silver With 1/4 NPT 12V
Continue Reading

12V 180DB Quad Trumpet Truck Horn with Air Valve Kit Van Train Car Truck Boat

12V-180DB-Quad-Trumpet-Truck-Horn-with-Air-Valve-Kit-Van-Train-Car-Truck-Boat-01-hz
12V 180DB Quad Trumpet Truck Horn with Air Valve Kit Van Train Car Truck Boat
12V 180DB Quad Trumpet Truck Horn with Air Valve Kit Van Train Car Truck Boat
12V 180DB Quad Trumpet Truck Horn with Air Valve Kit Van Train Car Truck Boat
12V 180DB Quad Trumpet Truck Horn with Air Valve Kit Van Train Car Truck Boat
12V 180DB Quad Trumpet Truck Horn with Air Valve Kit Van Train Car Truck Boat
12V 180DB Quad Trumpet Truck Horn with Air Valve Kit Van Train Car Truck Boat
12V 180DB Quad Trumpet Truck Horn with Air Valve Kit Van Train Car Truck Boat
12V 180DB Quad Trumpet Truck Horn with Air Valve Kit Van Train Car Truck Boat

12V 180DB Quad Trumpet Truck Horn with Air Valve Kit Van Train Car Truck Boat
12V 180DB Quad Trumpet Truck Horn with Air Valve Kit Van Train Car Truck Boat Product Information: This powerful quad trumpet air horn produces a loud roaring sound. Chrome look, made entirely of metal for maximum protection against all weather conditions. Horn comes with a 12/24V solenoid, hose and mounting hardware. An on-board air system is required for operation. Ideal for all vehicles with a 12/24V system. This horn is sure to draw all the attention you are looking for.
12V 180DB Quad Trumpet Truck Horn with Air Valve Kit Van Train Car Truck Boat
Continue Reading

Air Compressor For Train Horns Air Pressure Supply Kit Silver With 1/4 NPT 12V

Air-Compressor-For-Train-Horns-Air-Pressure-Supply-Kit-Silver-With-1-4-NPT-12V-01-olpu
Air Compressor For Train Horns Air Pressure Supply Kit Silver With 1/4 NPT 12V
Air Compressor For Train Horns Air Pressure Supply Kit Silver With 1/4 NPT 12V
Air Compressor For Train Horns Air Pressure Supply Kit Silver With 1/4 NPT 12V
Air Compressor For Train Horns Air Pressure Supply Kit Silver With 1/4 NPT 12V
Air Compressor For Train Horns Air Pressure Supply Kit Silver With 1/4 NPT 12V

Air Compressor For Train Horns Air Pressure Supply Kit Silver With 1/4 NPT 12V
Description: The silver maintenance free heavy-duty air compressor is rated at 200psi and is designed for any high-pressure on-board air system or other applications requiring air pressure supply. The perfect kit helps to save the power of the air compressor. The unit is equipped with standard 1 / 4 NPT stainless steel braided lead hose and mounting hardware. Applicable to all vehicles equipped with 12V system. Included in this kit: 1 200PSI air compressor with 1/4 NPT stainless steel braided leader hose mounting hardware Specification.
Air Compressor For Train Horns Air Pressure Supply Kit Silver With 1/4 NPT 12V
Continue Reading
Continue Reading
Continue Reading

Air Compressor For Train Horns Air Pressure Supply Kit Silver With 1/4 NPT 12V

Air-Compressor-For-Train-Horns-Air-Pressure-Supply-Kit-Silver-With-1-4-NPT-12V-01-yvow
Air Compressor For Train Horns Air Pressure Supply Kit Silver With 1/4 NPT 12V
Air Compressor For Train Horns Air Pressure Supply Kit Silver With 1/4 NPT 12V
Air Compressor For Train Horns Air Pressure Supply Kit Silver With 1/4 NPT 12V
Air Compressor For Train Horns Air Pressure Supply Kit Silver With 1/4 NPT 12V
Air Compressor For Train Horns Air Pressure Supply Kit Silver With 1/4 NPT 12V

Air Compressor For Train Horns Air Pressure Supply Kit Silver With 1/4 NPT 12V
The silver maintenance free heavy-duty air compressor is rated at 200psi and is designed for any high-pressure on-board air system or other applications requiring air pressure supply. The perfect kit helps to save the power of the air compressor. The unit is equipped with standard 1 / 4 NPT stainless steel braided lead hose and mounting hardware. Applicable to all vehicles equipped with 12V system. Included in this kit. 1 200PSI air compressor with 1/4 NPT stainless steel braided leader hose. Air Compressor For Train Horns Air Pressure Supply Kit Silver With 1/4 NPT 12V. 1 200PSI air compressor with. 1/4 NPT stainless steel braided leader hose. Type: 200PSI black air compressor. Thread: 1/4 NPT stainless steel braided leader hose. Working Voltage:12 Volt. Package Size(inch):14.29.87.4. 11″(L)×3.9″(W)×6.5(H). Max Amp Draw:23 Amps. Max Working Pressure:200 PSI. Do not attempt to disassemble, repair or customize this product. Avoid setting up any parts of this product where there is a risk of falling off or risk of coming in contact with water. Never leave this product unattended during use. Intended for use by adults only. During and immediately after use, avoid touching any part of the compressor with bare hands as it is very hot during such periods. Avoid sounding the air horn when in close range to your ear(s) or the ear(s) of others. Avoid use of product near flames, explosive materials, aerosol products or oxygen devices. Be sure to pump nothing other than atmospheric air. It is important to determine the maximum air pressure for any tool or attachment before using it. Air sprayer or nozzle should always be pointed away from any part of the body. The compressor has Thermal Overload Protection, if this protection activates, cut off the source of power and let the unit cool down for about 30 minutes. This will reset the system and allow you to safely resume use of the air compressor. Make sure your battery ground is detached before you begin. Set the horn up for use only in areas with adequate ventilation. Employ equipment for eye protection during drilling operations. Ensure that your air system has no pressure before you begin. The specific voltage requirement for this horn system is 12 volt DC, therefore installation must be done to a DC power source of 12 volts. Determine a dry place to mount your compressor. If you have chosen to install in the engine compartment, you should mount it as close to the front as possible to allow for maximum flow of air around compressor and also to avoid heat from the exhaust. IMPORTANT: Never attach the compressor to any plastic or other flexible material. For optimal results, the compressor should be placed as close to the battery as possible. This will reduce the amount of wiring needed. Avoid placing compressor near flammable liquids. If you are planning to move compressor’s air intake to an area other than where the compressor was installed, make sure your placement allows for the airline to be routed from the air inlet of the compressor to the remote inlet air filter. Mark the spots for the holes with the mounting base as a guide and then drill. Make sure the compressor is secured. To enhance performance and make sure the battery of your vehicle doesn’t discharge, keep the engine running while the compressor is being used. Connect the stainless steel braided hose of the compressor to the tank’s inlet port. IMPORTANT: The tank’s inlet port must be 1/4 N. The check valve is an important part of the air compressor and has only one function: to let air flow from one side to the other, in this case from the compressor to the tank, while blocking air flow in the opposite direction. IMPORTANT: When installing the braided hose do not rotate or remove the inline check valve located at the end of the hose on the side that connects to the air tank. Doing so will damage its seals and will result in damage to your air compressor. Using a compatible remote air filter installation kit (NOT PROVIED) your compressor’s air intake can be installed in an area other than where the compressor was installed. The red wire of the compressor should be connected to (+) 12-volt power source. IMPORTANT: To prevent the compressor from over running and possible damage due to an air leak, connect the compressor’s red wire to a power source in the vehicle that only gets power when the vehicle’s ignition is on. Recommended connection points are: windshield wiper motor, blower motor or an accessory terminal on the fuse panel. Make sure to use wire that is as heavy as the wire of the compressor and to use the included fuse for circuit’s protection. Attach the black wire to any of the Pressure Switch’s connections located on the air tank. The remaining Pressure Switch connection should be attached to ground. Secure the end to any metal body or to the negative side of the vehicle’s battery. The ground connection should be rust and paint free. Your compressor is now set for use and will turn on automatically when air pressure in the air tank falls. When air pressure reaches maximum PSI, it will turn off. If the compressor fails to reach the maximum air pressure of the tank, which is the Pressure Switch’s cut OFF pressure, check all air connections for leaks. While the compressor is pumping, use soapy water or any bubble solution to perform this check. In case the leak remains after tightening, re-apply thread sealant. Make sure that electrical and fitting connections are regularly inspected, cleaned and tightened when needed. Make sure mounting screws are regularly tightened if needed. Compressor features a washable air filter which should be cleaned using any mild form of liquid soap every two months if it gets dusty. Just remove the front cover of the filter’s housing to reach it. Replacement time frames depend on the operating environment and how often it is used. Clean dirt and dust from heat spreader and motor housing of the compressor. The motor of the air compressor has a maintenance-free lasting lubricant. SOLUTIONS TO COMMON ISSUES. Solution 1: Check all switches to make sure they are ON. Solution 2: Check the fuse; if blown, disconnect compressor from power and replace the fuse. Solution 3: Allow compressor to cool off for 30-60 minutes. Solution 4: Check pressure switch, replace if damaged or inoperable. Issue: Excessive moisture in horn or safety valve. Solution 1: Depressurize and drain the tank. Solution 2: Relocate the on-board air system to a drier location. Issue: Continual cutting-off of Thermal overload protection. Solution 1: Relocate the on-board air system to a drier, cooler location. Solution 2: Replace the compressor. Issue: Excessive vibration or noise. Solution 1: Tighten system components. Issue: Loss of pressure of tank when compressor is shut off. Solution 1: Tighten drain cock. Solution 2: Examine air and check valves and replace if damaged or leaking. Solution 3: Use soap and water solution on air connections, and tighten connections or repair leaks where needed. Olution 4: Replace safety valve if present in the tank, it may be defective. Issue: Compressor runs continuously and has low air flow. Solution 1: Decrease the frequency of use. Solution 2: Use soap and water solution on air connections, and tighten connections or repair leaks where needed. Solution 3: Clean or replace the air filter element if it is clogged. Solution 4: Replace compressor. Make sure you never attempt to disassemble this horn kit’s electrical components. Never use your bare hands to any part of the compressor immediately after or during use. Avoid operating this product in an area with risk of falling or submergence into a liquid (water). Do not reach out for or touch any component that has fallen or been submerged into water. Make sure you set up in areas with good ventilation. Never sound the air horn anywhere near your ear(s) or that of another person. Make sure your battery ground is detached before getting your installation started. The specific voltage requirement for this horn kit is 12 volt DC, therefore installation must be done to a DC power source of 12 volts. 14.29.87.4. The images shown are not the actual item and are for your reference only. Service transit time is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season. There are NO EXCEPTIONS! FEEDBACK IS VERY IMPORTANT TO US. It is impossible to address issues if we do not know about them! Transfer Case Shift Motor. Secondary Air Injection Pump. Center Console Organizer Parts. ATV Brake Master Cylinder. Mass Air Flow Sensor. Splash Guards & Mud Flaps. Brake Disc Rotors and Pads. Brake Pads & Rotor & Caliper. Brake Pads & Calipers. Light Bar Mount Bracket. Cylinder Head Gasket Sets. 4 Pcs wheel hub bearing. UTV & ATV Brake System Parts. Kevlar Carbon Brake Pads. Pivot Brake Clutch Lever. Cooling Fans and Fan Clutches. Brake Rotors Pads & Drum Shoe. Rear Window Louver Cover. C Notch & Flip Kit. Other Golf Cart Parts. Body Side Door Moulding. Motorcycle Carburetor & Parts. Variable Timing Solenoid(VVT). Cylinder piston gasket kit. Wheel Hub Bearing Knuckle. Ignition Coil & Spark Plug Set. Oxygen O2 02 Sensor for 04-08 Acura TSX 03-07 Honda Accord 2.4L Downstream. 2pcs 1 Upstream & 1 Downstream Oxygen Sensor For 96-02 Honda Accord 2.2L 3.0L. For Ford Ranger 2.3L 2.5L F150 Expedition Lincoln Mercury FD487 Ignition Coil. 4PCS Ignition Coil For Toyota Camry RAV4 Highlander Solara Scion 2.4L UF333. 6x Ignition Coils for Nissan Frontier Pathfinder Altima Maxima 3.5L 4.0L UF349.
Air Compressor For Train Horns Air Pressure Supply Kit Silver With 1/4 NPT 12V
Continue Reading

Air Compressor For Train Horns Air Pressure Supply Kit Silver With 1/4 NPT 12V

Air-Compressor-For-Train-Horns-Air-Pressure-Supply-Kit-Silver-With-1-4-NPT-12V-01-pgmb
Air Compressor For Train Horns Air Pressure Supply Kit Silver With 1/4 NPT 12V
Air Compressor For Train Horns Air Pressure Supply Kit Silver With 1/4 NPT 12V
Air Compressor For Train Horns Air Pressure Supply Kit Silver With 1/4 NPT 12V
Air Compressor For Train Horns Air Pressure Supply Kit Silver With 1/4 NPT 12V
Air Compressor For Train Horns Air Pressure Supply Kit Silver With 1/4 NPT 12V

Air Compressor For Train Horns Air Pressure Supply Kit Silver With 1/4 NPT 12V
The silver maintenance free heavy-duty air compressor is rated at 200psi and is designed for any high-pressure on-board air system or other applications requiring air pressure supply. The perfect kit helps to save the power of the air compressor. The unit is equipped with standard 1 / 4 NPT stainless steel braided lead hose and mounting hardware. Applicable to all vehicles equipped with 12V system. Included in this kit. 1 200PSI air compressor with 1/4 NPT stainless steel braided leader hose. Air Compressor For Train Horns Air Pressure Supply Kit Silver With 1/4 NPT 12V. 1 200PSI air compressor with. 1/4 NPT stainless steel braided leader hose. Type: 200PSI black air compressor. Thread: 1/4 NPT stainless steel braided leader hose. Working Voltage:12 Volt. Package Size(inch):14.29.87.4. 11″(L)×3.9″(W)×6.5(H). Max Amp Draw:23 Amps. Max Working Pressure:200 PSI. Do not attempt to disassemble, repair or customize this product. Avoid setting up any parts of this product where there is a risk of falling off or risk of coming in contact with water. Never leave this product unattended during use. Intended for use by adults only. During and immediately after use, avoid touching any part of the compressor with bare hands as it is very hot during such periods. Avoid sounding the air horn when in close range to your ear(s) or the ear(s) of others. Avoid use of product near flames, explosive materials, aerosol products or oxygen devices. Be sure to pump nothing other than atmospheric air. It is important to determine the maximum air pressure for any tool or attachment before using it. Air sprayer or nozzle should always be pointed away from any part of the body. The compressor has Thermal Overload Protection, if this protection activates, cut off the source of power and let the unit cool down for about 30 minutes. This will reset the system and allow you to safely resume use of the air compressor. Make sure your battery ground is detached before you begin. Set the horn up for use only in areas with adequate ventilation. Employ equipment for eye protection during drilling operations. Ensure that your air system has no pressure before you begin. The specific voltage requirement for this horn system is 12 volt DC, therefore installation must be done to a DC power source of 12 volts. Determine a dry place to mount your compressor. If you have chosen to install in the engine compartment, you should mount it as close to the front as possible to allow for maximum flow of air around compressor and also to avoid heat from the exhaust. IMPORTANT: Never attach the compressor to any plastic or other flexible material. For optimal results, the compressor should be placed as close to the battery as possible. This will reduce the amount of wiring needed. Avoid placing compressor near flammable liquids. If you are planning to move compressor’s air intake to an area other than where the compressor was installed, make sure your placement allows for the airline to be routed from the air inlet of the compressor to the remote inlet air filter. Mark the spots for the holes with the mounting base as a guide and then drill. Make sure the compressor is secured. To enhance performance and make sure the battery of your vehicle doesn’t discharge, keep the engine running while the compressor is being used. Connect the stainless steel braided hose of the compressor to the tank’s inlet port. IMPORTANT: The tank’s inlet port must be 1/4 N. The check valve is an important part of the air compressor and has only one function: to let air flow from one side to the other, in this case from the compressor to the tank, while blocking air flow in the opposite direction. IMPORTANT: When installing the braided hose do not rotate or remove the inline check valve located at the end of the hose on the side that connects to the air tank. Doing so will damage its seals and will result in damage to your air compressor. Using a compatible remote air filter installation kit (NOT PROVIED) your compressor’s air intake can be installed in an area other than where the compressor was installed. The red wire of the compressor should be connected to (+) 12-volt power source. IMPORTANT: To prevent the compressor from over running and possible damage due to an air leak, connect the compressor’s red wire to a power source in the vehicle that only gets power when the vehicle’s ignition is on. Recommended connection points are: windshield wiper motor, blower motor or an accessory terminal on the fuse panel. Make sure to use wire that is as heavy as the wire of the compressor and to use the included fuse for circuit’s protection. Attach the black wire to any of the Pressure Switch’s connections located on the air tank. The remaining Pressure Switch connection should be attached to ground. Secure the end to any metal body or to the negative side of the vehicle’s battery. The ground connection should be rust and paint free. Your compressor is now set for use and will turn on automatically when air pressure in the air tank falls. When air pressure reaches maximum PSI, it will turn off. If the compressor fails to reach the maximum air pressure of the tank, which is the Pressure Switch’s cut OFF pressure, check all air connections for leaks. While the compressor is pumping, use soapy water or any bubble solution to perform this check. In case the leak remains after tightening, re-apply thread sealant. Make sure that electrical and fitting connections are regularly inspected, cleaned and tightened when needed. Make sure mounting screws are regularly tightened if needed. Compressor features a washable air filter which should be cleaned using any mild form of liquid soap every two months if it gets dusty. Just remove the front cover of the filter’s housing to reach it. Replacement time frames depend on the operating environment and how often it is used. Clean dirt and dust from heat spreader and motor housing of the compressor. The motor of the air compressor has a maintenance-free lasting lubricant. SOLUTIONS TO COMMON ISSUES. Solution 1: Check all switches to make sure they are ON. Solution 2: Check the fuse; if blown, disconnect compressor from power and replace the fuse. Solution 3: Allow compressor to cool off for 30-60 minutes. Solution 4: Check pressure switch, replace if damaged or inoperable. Issue: Excessive moisture in horn or safety valve. Solution 1: Depressurize and drain the tank. Solution 2: Relocate the on-board air system to a drier location. Issue: Continual cutting-off of Thermal overload protection. Solution 1: Relocate the on-board air system to a drier, cooler location. Solution 2: Replace the compressor. Issue: Excessive vibration or noise. Solution 1: Tighten system components. Issue: Loss of pressure of tank when compressor is shut off. Solution 1: Tighten drain cock. Solution 2: Examine air and check valves and replace if damaged or leaking. Solution 3: Use soap and water solution on air connections, and tighten connections or repair leaks where needed. Olution 4: Replace safety valve if present in the tank, it may be defective. Issue: Compressor runs continuously and has low air flow. Solution 1: Decrease the frequency of use. Solution 2: Use soap and water solution on air connections, and tighten connections or repair leaks where needed. Solution 3: Clean or replace the air filter element if it is clogged. Solution 4: Replace compressor. Make sure you never attempt to disassemble this horn kit’s electrical components. Never use your bare hands to any part of the compressor immediately after or during use. Avoid operating this product in an area with risk of falling or submergence into a liquid (water). Do not reach out for or touch any component that has fallen or been submerged into water. Make sure you set up in areas with good ventilation. Never sound the air horn anywhere near your ear(s) or that of another person. Make sure your battery ground is detached before getting your installation started. The specific voltage requirement for this horn kit is 12 volt DC, therefore installation must be done to a DC power source of 12 volts. 14.29.87.4. The images shown are not the actual item and are for your reference only. Service transit time is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season. There are NO EXCEPTIONS! FEEDBACK IS VERY IMPORTANT TO US. It is impossible to address issues if we do not know about them! Transfer Case Shift Motor. Secondary Air Injection Pump. Center Console Organizer Parts. ATV Brake Master Cylinder. Mass Air Flow Sensor. Splash Guards & Mud Flaps. Brake Disc Rotors and Pads. Brake Pads & Rotor & Caliper. Brake Pads & Calipers. Light Bar Mount Bracket. Cylinder Head Gasket Sets. 4 Pcs wheel hub bearing. UTV & ATV Brake System Parts. Kevlar Carbon Brake Pads. Pivot Brake Clutch Lever. Cooling Fans and Fan Clutches. Brake Rotors Pads & Drum Shoe. Rear Window Louver Cover. Engine Splash Shield Guard. C Notch & Flip Kit. Other Golf Cart Parts. Body Side Door Moulding. Motorcycle Carburetor & Parts. Variable Timing Solenoid(VVT). Cylinder piston gasket kit. Wheel Hub Bearing Knuckle. Air suspension valve solenoid. Power+Heated Manual Telescoping Black For 2004-09 Dodge Durango Left Side Mirror. For 2005-08 Suzuki Forenza Reno Power Window Regulator Front RH LH w/ motor. L+R For 99-07 Ford F250/F350/F450/F550 Power Heated Turn Signal Tow Side Mirrors. 6x Ignition Coils for Nissan Frontier Pathfinder Altima Maxima 3.5L 4.0L UF349. For Ford Ranger 2.3L 2.5L F150 Expedition Lincoln Mercury FD487 Ignition Coil.
Air Compressor For Train Horns Air Pressure Supply Kit Silver With 1/4 NPT 12V
Continue Reading

Viking Horns 200 PSI Air Compressor for Train Horns/Suspension Car/Truck Any Use

Viking-Horns-200-PSI-Air-Compressor-for-Train-Horns-Suspension-Car-Truck-Any-Use-01-ut
Viking Horns 200 PSI Air Compressor for Train Horns/Suspension Car/Truck Any Use
Viking Horns 200 PSI Air Compressor for Train Horns/Suspension Car/Truck Any Use
Viking Horns 200 PSI Air Compressor for Train Horns/Suspension Car/Truck Any Use
Viking Horns 200 PSI Air Compressor for Train Horns/Suspension Car/Truck Any Use
Viking Horns 200 PSI Air Compressor for Train Horns/Suspension Car/Truck Any Use

Viking Horns 200 PSI Air Compressor for Train Horns/Suspension Car/Truck Any Use
The Viking Horns multi-use V103C 12 volts 23 amps, 200 PSI air compressor is a necessary part that every air tank needs and depends on. Rugged Design: Viking Horn’s air compressor is built with reliability in mind which is why we used durable steel capable of taking on anything being moisture and dust-resistant. Compression: Our air compressor is capable of quickly filling air tanks up to the size of 5 gallons with 200 PSI. Universal Use: Ideal for any 12-volt system vehicles, such as SUV, Truck, RV, Pick-Up, Marine, and more. Whatever needs you would have for a 200 PSI heavy-duty air compressor we can provide it, and you can put it to the test. Straightforward Installation: we have provided with the air compressor a 1/4 NPT braided air hose, and a removable air Intake filter paired with a simple 2 electric wire installation. 12.17 x 9.8 x 5.98 inches.
Viking Horns 200 PSI Air Compressor for Train Horns/Suspension Car/Truck Any Use
Continue Reading

Viking Horns 200 PSI Air Compressor for Train Horns/Suspension Car/Truck Any Use

Viking-Horns-200-PSI-Air-Compressor-for-Train-Horns-Suspension-Car-Truck-Any-Use-01-yvyp
Viking Horns 200 PSI Air Compressor for Train Horns/Suspension Car/Truck Any Use
Viking Horns 200 PSI Air Compressor for Train Horns/Suspension Car/Truck Any Use
Viking Horns 200 PSI Air Compressor for Train Horns/Suspension Car/Truck Any Use
Viking Horns 200 PSI Air Compressor for Train Horns/Suspension Car/Truck Any Use
Viking Horns 200 PSI Air Compressor for Train Horns/Suspension Car/Truck Any Use

Viking Horns 200 PSI Air Compressor for Train Horns/Suspension Car/Truck Any Use
The Viking Horns multi-use V103C 12 volts 23 amps, 200 PSI air compressor is a necessary part that every air tank needs and depends on. Rugged Design: Viking Horn’s air compressor is built with reliability in mind which is why we used durable steel capable of taking on anything being moisture and dust-resistant. Compression: Our air compressor is capable of quickly filling air tanks up to the size of 5 gallons with 200 PSI. Universal Use: Ideal for any 12-volt system vehicles, such as SUV, Truck, RV, Pick-Up, Marine, and more. Whatever needs you would have for a 200 PSI heavy-duty air compressor we can provide it, and you can put it to the test. Straightforward Installation: we have provided with the air compressor a 1/4 NPT braided air hose, and a removable air Intake filter paired with a simple 2 electric wire installation. 12.17 x 9.8 x 5.98 inches.
Viking Horns 200 PSI Air Compressor for Train Horns/Suspension Car/Truck Any Use
Continue Reading