Overall Length: 20 Inches (Approximately). Blade Length: 14 Inches (Approximately). Handle Length: 6 Inches (Approximately). Blade Material: Carbon Steel. Handle Material: Buffalo Horn Fixed With Brass Guard. Leather Sheath: Premium Leather Sheath Will Be Provided. We make custom orders of hunting knives, Bowie knives, blank blades, swords, axes, Skinner knives, tracker knives. We don’t sell our items to those who are under 18. Tips for knife caring. Never store your knife for a long time in the leather sheath. Leather can absorb water, which can rust the blade. After using always clean the blade with oil. All our items are totally handmade. We use cowhide vegetable-tanned leather for the leather sheath.
Continue Reading
THE KNIFE AND LEATHER BELT SHEATH IN THE PHOTOS, ARE WHAT YOU WILL GET. HIGH QUALITY 12 3/4″ OVERALL – 7 1/2″ HOLLOW GRIND BLADE. Is a high-carbon premium Japanese stainless steel. AUS-10 has an excellent resistance to rusting. The elements that make up AUS-10 help the steel reach a high level of hardness, wear and corrosion resistance, toughness, and superior edge retention. The hardness of AUS-10 steel is mostly caused by the incredibly high carbon-content of approximately 1.05. As a result the knives can easily be sharpened leaving you with razor-sharp edge. AUS-10 knives don’t need to be sharpened frequently. Hardened to 58-60HRC – SHARP! 7 1/8 Cutting Edges. 1 3/8 Wide Blade. 5 1/8 Long Comfort Grip Handle. 3/16 Thick at the Spine. Knife Weight: 14 Ounces. Blade Filing Art on Spine. The knife comes with the high-quality cowhide leather sheath in the photos. If the sheath has a loop it is for a fire starter or sharpening rod (NOT included). If the sheath has attached straps they are for concealed and horizontal carry options. KNIFE CARE AND CLEANING: When needed, use a Diamond Wet Stone or better to re-sharpen the blade. When done using the knife, wash it in soap and water, dry completely, coat in olive oil and store away from the sheath. Leather pulls moisture out of the air and can rust the blade and bolsters if stored improperly. All our knives and axes are 100% handmade. We do not use any CNC machining, water-jet, or pre-cut blanks to make our items. Each knife or Axe will be 100% unique and may have some handmade characteristics that make them unique. Continue Reading
THE KNIFE AND LEATHER BELT SHEATH IN THE PHOTOS, ARE WHAT YOU WILL GET. HIGH QUALITY 11 1/4″ OVERALL – 6 1/8″ HOLLOW GRIND BLADE. Is a high-carbon premium Japanese stainless steel. AUS-10 has an excellent resistance to rusting. The elements that make up AUS-10 help the steel reach a high level of hardness, wear and corrosion resistance, toughness, and superior edge retention. The hardness of AUS-10 steel is mostly caused by the incredibly high carbon-content of approximately 1.05. As a result the knives can easily be sharpened leaving you with razor-sharp edge. AUS-10 knives don’t need to be sharpened frequently. Hardened to 58-60HRC – SHARP! 5 1/2 Cutting Edges. 1 1/2 Wide Blade. 5 1/4 Long Comfort Grip Handle. 3/16 Thick at the Spine. Knife Weight: 14 Ounces. Blade Filing Art on Spine. The knife comes with the high-quality cowhide leather sheath in the photos. If the sheath has a loop it is for a fire starter or sharpening rod (NOT included). If the sheath has attached straps they are for concealed and horizontal carry options. KNIFE CARE AND CLEANING: When needed, use a Diamond Wet Stone or better to re-sharpen the blade. When done using the knife, wash it in soap and water, dry completely, coat in olive oil and store away from the sheath. Leather pulls moisture out of the air and can rust the blade and bolsters if stored improperly. All our knives and axes are 100% handmade. We do not use any CNC machining, water-jet, or pre-cut blanks to make our items. Each knife or Axe will be 100% unique and may have some handmade characteristics that make them unique. Continue Reading
Handmade with high-carbon Damascus steel for exceptional strength and durability. Unique stag horn handle offers a secure grip and rustic charm. Perfect for hunting, camping, or as a collector’s item. Blade length: 8.5 inches (21.59 cm). Handle length: 4.5 inches (11.43 cm). Overall length: 13 inches (33.02 cm). Clean and oil the blade after each use to maintain its integrity. Avoid storing in leather case for extended periods to prevent damage. Continue Reading
Cazadores Knives has skilled craftsmen that specialize in Damascus steel, an incredibly durable material made from layering and folding steel into hundreds of layers. This collection of immaculate blades offer the best of both form and function. Blade Length: 10. Blade Material: 52100 Steel, 5160 Steel, 203E Steel, 15N20 Steel. Blade Hardness: 58 HRC. Blade Style: Bowie. Blade Type: Fixed Blade. Blade Finish: Damascus. Handle Material: Micarta With Brass Bolster. Handle Thickness: 0.5. Overall Length: 15. Weight: 11 oz. Leather Sheath Included. Damascus steel can rust if not cared for properly. Please be aware Damascus steel products will arrive fully coated in a protective, non-toxic mineral oil, which can be easily washed off before use. Damascus steel should be regularly oiled with any household oil over the course of its life to prevent corrosion. We will resolve all issues as quickly as possible. We are not responsible for any injuries associated with the use of our tools. Our products are intended for legal use only by responsible buyers. Therefore, we will not sell our products to anyone under the age of 18. Charges Will Always Be Paid By Customer. Our Tools are very sharp so open and use them very carefully We are not responsible for any injuries associated with the use of our tools. Tips to Care Blades. NEVER STORE YOUR BLADE FOR LONG TIME IN LEATHER SHEATH. LEATHER CAN ABSORB WATER, WHICH WILL RUST THE KNIFE. ALWAYS CLEAN THE BLADE AFTER USING WITH OIL. We use DHL or UPS normally. All our Products are Handmade and Unique.
Continue Reading
HANDMADE DAMASCUS STEEL KNIFE WITH LEATHER SHEATH. OVER ALL LENGTH = 23 inches. HANDLE LENGTH = 6.00 inches. BLADE LENGTH =17.00 Inches. BLADE MATERIAL = Damascus Steel. BLADE WIDTH = 02.00 inches. BLADE THICKNESS = 5 MM. HANDLE MATERIAL = Buffalo Horn & Bone. Accessory = Buffalo Leather Cover. Blade Of This Knife Has High Quality Contents To Give An Excellent Edge And Sharp Cutting Abilities. Hardness Of The Blade Of This Knife Is Hrc 54-60 In The Lab & Been Hand Sharpened To A Sharp Edge. Sharpness Warning: Due to the exceptional sharpness of our blades, please handle with utmost care. Natural Material Care: To preserve both the blade and the leatherwork, avoid using water-based products on the blade or the leather handle and sheath. Blade Maintenance: We recommend using linseed oil to treat the blade. Linseed oil helps prevent rust and corrosion. Apply a thin coat to the clean, dry blade and buff off any excess. Leather Care: To maintain the leather handle and sheath, you can use a natural leather balm containing beeswax periodically. Apply a small amount of balm and buff it gently into the leather. Sharpening: For sharpening your knife, we recommend using either carborundum or diamond sharpening stones. Restrictions: We don’t sell our items to those who are under 18. Continue Reading
THE KNIFE AND LEATHER BELT SHEATH IN THE PHOTOS, ARE WHAT YOU WILL GET. HIGH QUALITY 10 5/8″ OVERALL – 5 3/4″ HOLLOW GRIND BLADE. VG10 Stainless Steel is a designation used for a very particular type of high quality stainless steel. The G stands for “gold”, which refers to the “gold standard” that this level of cryogenically tempered stainless steel has met. VG10 provides a superior edge retention and it is a good choice for blades that require heavier cutting applications. Cryogenically Tempered to 58-60HRC – SHARP! 5 1/4 Cutting Edges. 1 1/4 Wide Blade. 5 Long Smooth Comfort Grip Handle. 3/16 Thick at the Spine. Knife Weight: 14 Ounces. Blade Filing Art on Spine. The knife comes with the high-quality cowhide leather sheath in the photos. If the sheath has a loop it is for a fire starter or sharpening rod (NOT included). If the sheath has attached straps they are for concealed and horizontal carry options. KNIFE CARE AND CLEANING: When needed, use a Diamond Wet Stone or better to re-sharpen the blade. When done using the knife, wash it in soap and water, dry completely, coat in olive oil and store away from the sheath. Leather pulls moisture out of the air and can rust the blade and bolsters if stored improperly. All our knives and axes are 100% handmade. We do not use any CNC machining, water-jet, or pre-cut blanks to make our items. Each knife or Axe will be 100% unique and may have some handmade characteristics that make them unique.
Continue Reading
This is a handmade fighting knife made by AB Custom Cutlery. This blade is made of D2 steel and has a clip point shape with a false edge on top and a very sharp cutting edge. The double guard and sub hilt are both stainless steel.. The handle is made of natural buffalo horn with white streaks. The knife comes with a leather sheath, it is a high quality piece made in Pakistan. The sub hilt design provides extra grip and control. See all pics as they are part of the description and shows the condition, the dimensions and the exact item you will receive. Continue Reading
This CFK Handmade DC53 Custom SHEEP HORN Hunting Camping Skinner Knife is a must-have for any outdoor enthusiast. The knife is made with high-quality materials and is perfect for hunting and camping trips. It has a 5 drop point blade made of DC53 tool steel, a full tang, and a plain edge. The handle is made of sheep horn and is designed for ambidextrous dexterity. This knife comes with a lanyard hole and a sheath, making it easy to carry and store. It is an original piece, handmade in the United Kingdom by CFK. The knife is not modified and is not a vintage item. It is perfect for collectors and is an authentic piece. Get ready for your next outdoor adventure with this CFK Handmade DC53 Custom SHEEP HORN Hunting Camping Skinner Knife. Continue Reading
THE KNIFE AND LEATHER BELT SHEATH IN THE PHOTOS, ARE WHAT YOU WILL GET. HIGH QUALITY 8 3/8″ OVERALL – 3 7/8″ CONVEX GRIND BLADE. DC53 Tool Steel is a tool steel with exceptional toughness, wear resistance, compressive strength and temper resistance. These properties are obtained through its chemistry. Primary Carbides in DC53 are relatively small with highly uniform distribution as compared to other lower grade tool steels such as D2. This helps to provide DC53 with its superior toughness and fatigue resistances. DC53 has twice the toughness of D2 with superior wear resistance and substantially higher fatigue strength compared to D2 and holds an edge extremely well. Ardened to 58-60HRC – SHARP! 3 3/4 Cutting Edges. 1 1/8 Wide Blade. 4 5/8 Long Smooth Comfort Grip Handle. 3/16 Thick at the Spine. Knife Weight: 10 Ounces. Blade Filing Art on Spine. The knife comes with the high-quality cowhide leather sheath in the photos. If the sheath has a loop it is for a fire starter or sharpening rod (NOT included). If the sheath has attached straps they are for concealed and horizontal carry options. KNIFE CARE AND CLEANING: When needed, use a Diamond Wet Stone or better to re-sharpen the blade. When done using the knife, wash it in soap and water, dry completely, coat in olive oil and store away from the sheath. Leather pulls moisture out of the air and can rust the blade and bolsters if stored improperly. All our knives and axes are 100% handmade. We do not use any CNC machining, water-jet, or pre-cut blanks to make our items. Each knife or Axe will be 100% unique and may have some handmade characteristics that make them unique. Continue Reading
